Brake Spring pliers kit KB04622

Sandblasting gun for cabin sandblaster.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Universal extractor for extruding the injectors.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Device for brake pistons, designed for quick assembly or disassembly of brake pistons from the brake saddle device, without damaging the self-sealing ring or piston.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Pliers for brake springs, features:

• product weight: 1 kg.

The device for screwing the brake pistons.

Universal brake bleeding system equipped with a universal tip terminated hose. It has a multi-purpose adapter to connect a second tank. 

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Device for replacing the crankshaft VW.

A set of filters for testing Common Rail injectors. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Impact adapters.

The torque wrench protractor for final tightening of bolts and nuts.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Sandblasting gun for cabin sandblaster.

Self-locking pliers for cutting exhaust pipes.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Bit set torx, hex, spline-40 el.

Oil filter pliers 10".

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Piston ring tools 110-160 mm.

Wristband pliers set of 2 pcs.

The device for screwing the brake pistons.

Set for 12 brake pistons, universal for most cars. 

Hose clamp pliers for CLIC-R clamps.

Tongs for wristbands.

Cable ties used in cooling circuits.

Professional set of lambda probe caps 7 parts.

13 pieces of sheet metal spoons for car body, long and short in the set.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Bit set torx, hex, spline -54 pcs KB04760

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Retaining ring pliers.

Universal set for extruding the injectors with a hydraulic cylinder.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Walizka narzędziowa 171 elementów.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Puller for disassembly of O-rings and simings.

Flat band clamp pliers used in cooling circuits.

A set of tools for valve sealants.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Crimping and cutting pliers.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Lever set for upholstery clasps 27 pcs.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Set of hooks and scrapers set of 5 pieces.

Make sure valves seat perfectly during a top-end rebuild.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

A set of plastic buckles for prying the pins.

Set for springs and brake cups.

A set of cutters for regeneration of injector slots.

Auxiliary sleeve for adjusting the camshaft position.

The BMW DIESEL belt pulley wrench.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

DSG Clutch Removal Kit for VW Group C05/0213

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Devices for assembly and disassembly of multi-groove belts.

Clutch alingment tool set 17-piece KB04227.

108pcs Socket Tool Set YZ0804001

Set for dismantling the missing glow plugs KB02116.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

3pc Fuel Line Disconnect Set.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

The set consists of 4 levers.

Hand grease 120ml.

The key for the timing belt tensioner VW Audi.

Handwheel - screwdriver.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Kit for regeneration, thread repair.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Universal kit for disassembly / squeezing bearings and bolt pins 

Universal spring pullers are essential for professional chassis service. 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Universal extractor for extruding the injectors.

Set of socket wrenches for 14 element filters.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Thread repair set.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Specialized attachments are used to assemble and disassemble shock absorbers.

Universal spring pullers are essential for professional chassis service. 

Hard tools made of glass fiber reinforced plastic. 

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Pin drawing pliers.

A set of sockets and keys for an alternator 24poz.

Device for assembling and disassembling the wrist joint in the steering system.

Keys for oil plugs 12 parts.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

46pcs Socket Tool Set.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Pneumatic wrench 1/2" 1600Nm PCAS-001

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

General instructions for health and safety Workshops for vulcanization, work in accordance with the PIP and Health and Safety regulations.

Press, puller for pins, sleeves without adapters for a hydraulic cylinder.

Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Hose clamp pliers for CLIC-R clamps.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Set for springs and brake cups.

DSG Clutch Removal Kit for VW Group C05/0213

Universal spring pullers are essential for professional chassis service. 

Professional set of lambda probe caps 7 parts.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Clutch alingment tool set 17-piece KB04227.

Thread repair set.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Set of hooks and scrapers set of 5 pieces.