Torque Angle Protractor KB04183

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Set for dismantling the missing glow plugs KB02116.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Oil filter pliers 10".

Cable ties used in cooling circuits.

Specialized attachments are used to assemble and disassemble shock absorbers.

Universal kit for disassembly / squeezing bearings and bolt pins 

Pliers for brake springs, features:

• product weight: 1 kg.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

The set consists of 4 levers.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Impact adapters.

A set of cutters for regeneration of injector slots.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The key for adjusting the 27-42mm steering rods.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A set of filters for testing Common Rail injectors. 

Make sure valves seat perfectly during a top-end rebuild.

The BMW DIESEL belt pulley wrench.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Universal set for extruding the injectors with a hydraulic cylinder.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Walizka narzędziowa 171 elementów.

Auxiliary sleeve for adjusting the camshaft position.

Universal extractor for extruding the injectors.

Pin drawing pliers.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Professional set of lambda probe caps 7 parts.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Self-locking pliers for cutting exhaust pipes.

13 pieces of sheet metal spoons for car body, long and short in the set.

The key for the timing belt tensioner VW Audi.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Piston ring tools 110-160 mm.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Handwheel - screwdriver.

Hand grease 120ml.

Clutch alingment tool set 17-piece KB04227.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The torque wrench protractor for final tightening of bolts and nuts.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

108pcs Socket Tool Set YZ0804001

Bit set torx, hex, spline -54 pcs KB04760

Set for 12 brake pistons, universal for most cars. 

Puller for disassembly of O-rings and simings.

Retaining ring pliers.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Thread repair set.

Devices for assembly and disassembly of multi-groove belts.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

DSG Clutch Removal Kit for VW Group C05/0213

Device for assembling and disassembling the wrist joint in the steering system.

3pc Fuel Line Disconnect Set.

Wristband pliers set of 2 pcs.

Device for replacing the crankshaft VW.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

46pcs Socket Tool Set.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Bit set torx, hex, spline-40 el.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Keys for oil plugs 12 parts.

A set of plastic buckles for prying the pins.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

A set of tools for valve sealants.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Sandblasting gun for cabin sandblaster.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Lever set for upholstery clasps 27 pcs.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Hose clamp pliers for CLIC-R clamps.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Universal spring pullers are essential for professional chassis service. 

A set of sockets and keys for an alternator 24poz.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Tongs for wristbands.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Crimping and cutting pliers.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Set of socket wrenches for 14 element filters.

Flat band clamp pliers used in cooling circuits.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Hard tools made of glass fiber reinforced plastic. 

Set for dismantling the missing glow plugs KB02116.

Professional puller for broken bolts and pins. 

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

The device for screwing the brake pistons.

Kit for regeneration, thread repair.

Set of hooks and scrapers set of 5 pieces.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Set for springs and brake cups.

Universal spring pullers are essential for professional chassis service. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Sworzeń 16x67 CCU-0063

The device is designed for precise measurements of the curvature of the front suspension support pipes.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Air conditioning compressor clutch puller.

Lever set for upholstery clasps 27 pcs.

Universal extractor for extruding the injectors.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Timing lock for setting the camshafts, crankshaft and chain.

Electric table rotation switch 2 gears 6 rows for the assembly machine CCM-0021.

Oil for pneumatic tools LUX-10.