Engine mounting stand 570 kg T63003

Impact screwdriver with a shank and four tips in a practical plastic organizer.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Hand grease 120ml.

46pcs Socket Tool Set.

Flat band clamp pliers used in cooling circuits.

Universal spring pullers are essential for professional chassis service. 

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A set of plastic buckles for prying the pins.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The set consists of 4 levers.

Oil filter pliers 10".

A set of tools for valve sealants.

Devices for assembly and disassembly of multi-groove belts.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Auxiliary sleeve for adjusting the camshaft position.

Universal set for extruding the injectors with a hydraulic cylinder.

Crimping and cutting pliers.

Retaining ring pliers.

A set of filters for testing Common Rail injectors. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Device for assembling and disassembling the wrist joint in the steering system.

Bit set torx, hex, spline-40 el.

13 pieces of sheet metal spoons for car body, long and short in the set.

Device for replacing the crankshaft VW.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The BMW DIESEL belt pulley wrench.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

A set of sockets and keys for an alternator 24poz.

Piston ring tools 110-160 mm.

Walizka narzędziowa 171 elementów.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

3pc Fuel Line Disconnect Set.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Pliers for brake springs, features:

• product weight: 1 kg.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Make sure valves seat perfectly during a top-end rebuild.

Universal kit for disassembly / squeezing bearings and bolt pins 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Bit set torx, hex, spline -54 pcs KB04760

Keys for oil plugs 12 parts.

Universal extractor for extruding the injectors.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Set for springs and brake cups.

Set of hooks and scrapers set of 5 pieces.

Wristband pliers set of 2 pcs.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A set of cutters for regeneration of injector slots.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Set for dismantling the missing glow plugs KB02116.

Impact adapters.

Hose clamp pliers for CLIC-R clamps.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

DSG Clutch Removal Kit for VW Group C05/0213

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Universal spring pullers are essential for professional chassis service. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

The key for adjusting the 27-42mm steering rods.

Handwheel - screwdriver.

Kit for regeneration, thread repair.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Puller for disassembly of O-rings and simings.

The key for the timing belt tensioner VW Audi.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Sandblasting gun for cabin sandblaster.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Cable ties used in cooling circuits.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

108pcs Socket Tool Set YZ0804001

Self-locking pliers for cutting exhaust pipes.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Set of socket wrenches for 14 element filters.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The torque wrench protractor for final tightening of bolts and nuts.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Set for 12 brake pistons, universal for most cars. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Hard tools made of glass fiber reinforced plastic. 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Tongs for wristbands.

The device for screwing the brake pistons.

Professional puller for broken bolts and pins. 

Lever set for upholstery clasps 27 pcs.

Clutch alingment tool set 17-piece KB04227.

Professional set of lambda probe caps 7 parts.

1/2” Air Composite Impact Wrench PCAS-002

Keys for oil plugs 12 parts.

Three-leg pullers designed for removing bearings, discs, drums with 3 arms. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The device for screwing the brake pistons.

Devices for assembly and disassembly of multi-groove belts.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.