Stand for mounting the 450 kg engine T63002C

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The torque wrench protractor for final tightening of bolts and nuts.

A set of cutters for regeneration of injector slots.

Wristband pliers set of 2 pcs.

Professional puller for broken bolts and pins. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Bit set torx, hex, spline -54 pcs KB04760

The torque wrench protractor for final tightening of bolts and nuts.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Wristband pliers set of 2 pcs.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Hand grease 120ml.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Set for dismantling the missing glow plugs KB02116.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Keys for oil plugs 12 parts.

Device for replacing the crankshaft VW.

Device for assembling and disassembling the wrist joint in the steering system.

Clutch alingment tool set 17-piece KB04227.

Handwheel - screwdriver.

108pcs Socket Tool Set YZ0804001

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Devices for assembly and disassembly of multi-groove belts.

Crimping and cutting pliers.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

The BMW DIESEL belt pulley wrench.

Retaining ring pliers.

The device for screwing the brake pistons.

Lever set for upholstery clasps 27 pcs.

46pcs Socket Tool Set.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The key for the timing belt tensioner VW Audi.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Tongs for wristbands.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

13 pieces of sheet metal spoons for car body, long and short in the set.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Thread repair set.

A set of filters for testing Common Rail injectors. 

Universal spring pullers are essential for professional chassis service. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Professional set of lambda probe caps 7 parts.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A set of plastic buckles for prying the pins.

Universal extractor for extruding the injectors.

Set of hooks and scrapers set of 5 pieces.

Hose clamp pliers for CLIC-R clamps.

A set of tools for valve sealants.

Impact adapters.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Make sure valves seat perfectly during a top-end rebuild.

Cable ties used in cooling circuits.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Walizka narzędziowa 171 elementów.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The device is designed for precise measurements of the curvature of the front suspension support pipes.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Puller for disassembly of O-rings and simings.

DSG Clutch Removal Kit for VW Group C05/0213

Universal set for extruding the injectors with a hydraulic cylinder.

Sandblasting gun for cabin sandblaster.

Oil filter pliers 10".

Specialized attachments are used to assemble and disassemble shock absorbers.

Hard tools made of glass fiber reinforced plastic. 

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Set for 12 brake pistons, universal for most cars. 

Bit set torx, hex, spline-40 el.

Universal spring pullers are essential for professional chassis service. 

Self-locking pliers for cutting exhaust pipes.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Set of socket wrenches for 14 element filters.

Universal kit for disassembly / squeezing bearings and bolt pins 

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Pin drawing pliers.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Set for springs and brake cups.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

A set of cutters for regeneration of injector slots.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Auxiliary sleeve for adjusting the camshaft position.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Kit for regeneration, thread repair.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Piston ring tools 110-160 mm.

The set consists of 4 levers.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Professional puller for broken bolts and pins. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Flat band clamp pliers used in cooling circuits.

3pc Fuel Line Disconnect Set.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Oil for pneumatic tools LUX-10.

Sprężyna 15/76 CCU-0049

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

General instructions for health and safety Workshops for vulcanization, work in accordance with the PIP and Health and Safety regulations.

Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that fit in the dimensions of the press.

Hand grease 120ml.

Sworzeń 8x22 CCU-0060

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws.