Specialist puller for Mercedes injectors KB08710

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Pliers for brake springs, features:

• product weight: 1 kg.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Internal inertia puller 10-32 mm. A professional set, necessary in every workshop.

A professional set for removing bearings, gears, pulleys, rollers and others. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

   
Dźwignia do ściskania sprężyn zaworowych z zestawem trzech różnych końcówek montażowych.

Rear VW Barrel IV VW Skoda Audi DX-0150

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

A set of filters for testing Common Rail injectors. 

3pc Fuel Line Disconnect Set.

Pliers for brake springs, features:

• product weight: 1 kg.

A set of tools for valve sealants.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Tongs for wristbands.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

46pcs Socket Tool Set.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Clutch alingment tool set 17-piece KB04227.

Bit set torx, hex, spline -54 pcs KB04760

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Lever set for upholstery clasps 27 pcs.

DSG Clutch Removal Kit for VW Group C05/0213

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Devices for assembly and disassembly of multi-groove belts.

Hand grease 120ml.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

A set of cutters for regeneration of injector slots.

Specialized attachments are used to assemble and disassemble shock absorbers.

The device for screwing the brake pistons.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Set of hooks and scrapers set of 5 pieces.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

108pcs Socket Tool Set YZ0804001

Oil filter pliers 10".

Universal set for extruding the injectors with a hydraulic cylinder.

The BMW DIESEL belt pulley wrench.

Pin drawing pliers.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Thread repair set.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Auxiliary sleeve for adjusting the camshaft position.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Universal kit for disassembly / squeezing bearings and bolt pins 

The key for adjusting the 27-42mm steering rods.

The key for the timing belt tensioner VW Audi.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Self-locking pliers for cutting exhaust pipes.

Universal spring pullers are essential for professional chassis service. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Puller for disassembly of O-rings and simings.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Device for replacing the crankshaft VW.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set for dismantling the missing glow plugs KB02116.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Impact screwdriver with a shank and four tips in a practical plastic organizer.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Universal extractor for extruding the injectors.

Professional set of lambda probe caps 7 parts.

Kit for regeneration, thread repair.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Cable ties used in cooling circuits.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Hard tools made of glass fiber reinforced plastic. 

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The torque wrench protractor for final tightening of bolts and nuts.

Set of socket wrenches for 14 element filters.

Wristband pliers set of 2 pcs.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Handwheel - screwdriver.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Retaining ring pliers.

A set of filters for testing Common Rail injectors. 

The set consists of 4 levers.

Walizka narzędziowa 171 elementów.

Impact adapters.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Keys for oil plugs 12 parts.

Set for 12 brake pistons, universal for most cars. 

Piston ring tools 110-160 mm.

Sandblasting gun for cabin sandblaster.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

3pc Fuel Line Disconnect Set.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Set for springs and brake cups.

Hose clamp pliers for CLIC-R clamps.

Flat band clamp pliers used in cooling circuits.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Make sure valves seat perfectly during a top-end rebuild.

Crimping and cutting pliers.

Professional puller for broken bolts and pins. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Bit set torx, hex, spline-40 el.

Device for assembling and disassembling the wrist joint in the steering system.

A set of sockets and keys for an alternator 24poz.

A set of plastic buckles for prying the pins.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Keys for oil plugs 12 parts.

Sprężyna 160/10 z haczykami CCU-0052

PRZYRZĄD DO USTAWIANIA POMP WTRYSKOWYCH DIESEL.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Universal spring pullers are essential for professional chassis service. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Sworzeń 8x26 CCU-0059

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A set for pulling the injectors firmly seated in the cylinder head.

For removing seized or stuck Common Rail injectors

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Universal set for extruding the injectors with a hydraulic cylinder.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

13mm claw puller for Mercedes CDI injectors.

Three-leg pullers designed for removing bearings, discs, drums with 3 arms. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The set is used for pressing equi-axial bearings, sealants, rings, sleeves, e.g. switches, connecting rods, alnarnators, starters, etc.

Adaptery, tuleje do prasy do sworzni wahacza, VAG, VW - LT, CRAFTER, T4, MERCEDES - SPRINTER.