Automatic Center Punch 125mm, KB01150

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Hand grease 120ml.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Crimping and cutting pliers.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Make sure valves seat perfectly during a top-end rebuild.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A set of plastic buckles for prying the pins.

Keys for oil plugs 12 parts.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Pin drawing pliers.

Piston ring tools 110-160 mm.

Puller for disassembly of O-rings and simings.

The torque wrench protractor for final tightening of bolts and nuts.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Kit for regeneration, thread repair.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Hand grease 120ml.

The BMW DIESEL belt pulley wrench.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Auxiliary sleeve for adjusting the camshaft position.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Pliers for brake springs, features:

• product weight: 1 kg.

A set of tools for valve sealants.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The set consists of 4 levers.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Handwheel - screwdriver.

The key for adjusting the 27-42mm steering rods.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Universal set for extruding the injectors with a hydraulic cylinder.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Universal extractor for extruding the injectors.

Thread repair set.

Set of hooks and scrapers set of 5 pieces.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

A set of cutters for regeneration of injector slots.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Walizka narzędziowa 171 elementów.

The key for the timing belt tensioner VW Audi.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Universal kit for disassembly / squeezing bearings and bolt pins 

Clutch alingment tool set 17-piece KB04227.

Set for 12 brake pistons, universal for most cars. 

Set for springs and brake cups.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

46pcs Socket Tool Set.

Self-locking pliers for cutting exhaust pipes.

Device for assembling and disassembling the wrist joint in the steering system.

Hose clamp pliers for CLIC-R clamps.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Professional puller for broken bolts and pins. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

DSG Clutch Removal Kit for VW Group C05/0213

Cable ties used in cooling circuits.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

3pc Fuel Line Disconnect Set.

The device for screwing the brake pistons.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Set of socket wrenches for 14 element filters.

Impact adapters.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Flat band clamp pliers used in cooling circuits.

Lever set for upholstery clasps 27 pcs.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Bit set torx, hex, spline -54 pcs KB04760

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Devices for assembly and disassembly of multi-groove belts.

Wristband pliers set of 2 pcs.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Device for replacing the crankshaft VW.

Set for dismantling the missing glow plugs KB02116.

13 pieces of sheet metal spoons for car body, long and short in the set.

Oil filter pliers 10".

A set of filters for testing Common Rail injectors. 

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Professional set of lambda probe caps 7 parts.

Sandblasting gun for cabin sandblaster.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Universal spring pullers are essential for professional chassis service. 

A set of sockets and keys for an alternator 24poz.

Retaining ring pliers.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Universal spring pullers are essential for professional chassis service. 

Tongs for wristbands.

Hard tools made of glass fiber reinforced plastic. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Crimping and cutting pliers.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Bit set torx, hex, spline-40 el.

A hand-held knife with a dies, allows one person to be quickly cut out after disassembling or removing the gasket.

A set for pulling the injectors firmly seated in the cylinder head.

Sandblasting gun for siphon sanders. The gun matches the T06505, T06510, T06520A, T06520B gritter. Includes an additional 3 ceramic nozzles with covers.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Discs for mounting bearings, aluminum - 17 elements KB09022

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Air conditioning compressor clutch puller.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.