Professional Dial Indicator with Magnetic Base Holder, KB03577

46pcs Socket Tool Set.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The device for screwing the brake pistons.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The key for adjusting the 27-42mm steering rods.

Universal spring pullers are essential for professional chassis service. 

Set for dismantling the missing glow plugs KB02116.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Bit set torx, hex, spline -54 pcs KB04760

Piston ring tools 110-160 mm.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Hand grease 120ml.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Devices for assembly and disassembly of multi-groove belts.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Kit for regeneration, thread repair.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Pin drawing pliers.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Universal spring pullers are essential for professional chassis service. 

Tongs for wristbands.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

A set of plastic buckles for prying the pins.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Sandblasting gun for cabin sandblaster.

46pcs Socket Tool Set.

A set of sockets and keys for an alternator 24poz.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Specialized attachments are used to assemble and disassemble shock absorbers.

Professional puller for broken bolts and pins. 

A set of filters for testing Common Rail injectors. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Keys for oil plugs 12 parts.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Lever set for upholstery clasps 27 pcs.

3pc Fuel Line Disconnect Set.

Impact adapters.

Oil filter pliers 10".

DSG Clutch Removal Kit for VW Group C05/0213

Set for springs and brake cups.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

The key for the timing belt tensioner VW Audi.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Set of socket wrenches for 14 element filters.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The set consists of 4 levers.

Clutch alingment tool set 17-piece KB04227.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Set for 12 brake pistons, universal for most cars. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The torque wrench protractor for final tightening of bolts and nuts.

Device for assembling and disassembling the wrist joint in the steering system.

Puller for disassembly of O-rings and simings.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

108pcs Socket Tool Set YZ0804001

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Device for replacing the crankshaft VW.

Professional set of lambda probe caps 7 parts.

Handwheel - screwdriver.

Flat band clamp pliers used in cooling circuits.

Cable ties used in cooling circuits.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Make sure valves seat perfectly during a top-end rebuild.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

A set of cutters for regeneration of injector slots.

Universal extractor for extruding the injectors.

13 pieces of sheet metal spoons for car body, long and short in the set.

A set of tools for valve sealants.

Retaining ring pliers.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Wristband pliers set of 2 pcs.

The BMW DIESEL belt pulley wrench.

Universal kit for disassembly / squeezing bearings and bolt pins 

Universal set for extruding the injectors with a hydraulic cylinder.

Set of hooks and scrapers set of 5 pieces.

Hose clamp pliers for CLIC-R clamps.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Auxiliary sleeve for adjusting the camshaft position.

Walizka narzędziowa 171 elementów.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Bit set torx, hex, spline-40 el.

Pliers for brake springs, features:

• product weight: 1 kg.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Set of socket wrenches for 14 element filters.

13mm claw puller for Mercedes CDI injectors.

Set of hooks and scrapers set of 5 pieces.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A set of filters for testing Common Rail injectors. 

Thread repair set.

Safety instructions for CASTEX car workshops, work in accordance with the PIP and Health and Safety regulations.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.