32 PIECES METRIC TAP AND DIE SET KB10750

Device for assembling and disassembling the wrist joint in the steering system.

The key for the timing belt tensioner VW Audi.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Professional puller for broken bolts and pins. 

Professional set of lambda probe caps 7 parts.

Crimping and cutting pliers.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Crimping and cutting pliers.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Set for springs and brake cups.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

3pc Fuel Line Disconnect Set.

Thread repair set.

Lever set for upholstery clasps 27 pcs.

Set of socket wrenches for 14 element filters.

Professional set of lambda probe caps 7 parts.

46pcs Socket Tool Set.

Hose clamp pliers for CLIC-R clamps.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

The key for adjusting the 27-42mm steering rods.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The device for screwing the brake pistons.

A set of tools for valve sealants.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Auxiliary sleeve for adjusting the camshaft position.

Impact adapters.

Hand grease 120ml.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Professional puller for broken bolts and pins. 

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Self-locking pliers for cutting exhaust pipes.

The set consists of 4 levers.

Flat band clamp pliers used in cooling circuits.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Set for 12 brake pistons, universal for most cars. 

Universal set for extruding the injectors with a hydraulic cylinder.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

A set of plastic buckles for prying the pins.

Wristband pliers set of 2 pcs.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Make sure valves seat perfectly during a top-end rebuild.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Kit for regeneration, thread repair.

Universal extractor for extruding the injectors.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Walizka narzędziowa 171 elementów.

Universal spring pullers are essential for professional chassis service. 

Device for replacing the crankshaft VW.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Hard tools made of glass fiber reinforced plastic. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

DSG Clutch Removal Kit for VW Group C05/0213

The device is designed for precise measurements of the curvature of the front suspension support pipes.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Sandblasting gun for cabin sandblaster.

Pin drawing pliers.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A set of sockets and keys for an alternator 24poz.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Bit set torx, hex, spline -54 pcs KB04760

The BMW DIESEL belt pulley wrench.

Universal kit for disassembly / squeezing bearings and bolt pins 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Oil filter pliers 10".

A set of cutters for regeneration of injector slots.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Piston ring tools 110-160 mm.

Set of hooks and scrapers set of 5 pieces.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Puller for disassembly of O-rings and simings.

Tongs for wristbands.

The torque wrench protractor for final tightening of bolts and nuts.

Pliers for brake springs, features:

• product weight: 1 kg.

Bit set torx, hex, spline-40 el.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

The key for the timing belt tensioner VW Audi.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Clutch alingment tool set 17-piece KB04227.

Devices for assembly and disassembly of multi-groove belts.

13 pieces of sheet metal spoons for car body, long and short in the set.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A set of filters for testing Common Rail injectors. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

108pcs Socket Tool Set YZ0804001

Cable ties used in cooling circuits.

Handwheel - screwdriver.

Specialized attachments are used to assemble and disassemble shock absorbers.

Device for assembling and disassembling the wrist joint in the steering system.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Keys for oil plugs 12 parts.

Set for dismantling the missing glow plugs KB02116.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Retaining ring pliers.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Sprężyna 112/26 z haczykami CCU-0055

Bit set torx, hex, spline -54 pcs KB04760

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Press for extruding bolts with a 12 ton hydraulic cylinder.

Three-leg pullers designed for removing bearings, discs, drums with 3 arms. 

1/2” Air Composite Impact Wrench PCAS-002

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.