A set of expanders for pipes and wires KB04036

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Thread repair set.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Puller inertial puller. Professional tinsmith, inertia hammer together with a set of connections, brackets, hooks and adapters for car body repairs.

Cam lock Fiat Ducato 2.3 / 3.0 JTD Iveco, PEUGEOT, CITROEN.

Pneumatic air jack with 2 tons capacity PM02-1

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Klucz dynamometryczny 1/2" King Tony.

46pcs Socket Tool Set.

Universal spring pullers are essential for professional chassis service. 

Crimping and cutting pliers.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Bit set torx, hex, spline-40 el.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Walizka narzędziowa 171 elementów.

Impact adapters.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set for 12 brake pistons, universal for most cars. 

Sandblasting gun for cabin sandblaster.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

DSG Clutch Removal Kit for VW Group C05/0213

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Kit for regeneration, thread repair.

13 pieces of sheet metal spoons for car body, long and short in the set.

Oil filter pliers 10".

Retaining ring pliers.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Clutch alingment tool set 17-piece KB04227.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Make sure valves seat perfectly during a top-end rebuild.

Keys for oil plugs 12 parts.

Bit set torx, hex, spline -54 pcs KB04760

A set of sockets and keys for an alternator 24poz.

Self-locking pliers for cutting exhaust pipes.

Hand grease 120ml.

The set consists of 4 levers.

Wristband pliers set of 2 pcs.

Cable ties used in cooling circuits.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Thread repair set.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A set of cutters for regeneration of injector slots.

Universal kit for disassembly / squeezing bearings and bolt pins 

The device for screwing the brake pistons.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Set for springs and brake cups.

A set of filters for testing Common Rail injectors. 

Piston ring tools 110-160 mm.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Universal spring pullers are essential for professional chassis service. 

Puller for disassembly of O-rings and simings.

Pin drawing pliers.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Flat band clamp pliers used in cooling circuits.

46pcs Socket Tool Set.

Hose clamp pliers for CLIC-R clamps.

Set of hooks and scrapers set of 5 pieces.

The key for adjusting the 27-42mm steering rods.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Tongs for wristbands.

The BMW DIESEL belt pulley wrench.

Universal extractor for extruding the injectors.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The torque wrench protractor for final tightening of bolts and nuts.

Set for dismantling the missing glow plugs KB02116.

Devices for assembly and disassembly of multi-groove belts.

Pliers for brake springs, features:

• product weight: 1 kg.

A set of plastic buckles for prying the pins.

3pc Fuel Line Disconnect Set.

Handwheel - screwdriver.

Universal set for extruding the injectors with a hydraulic cylinder.

Hard tools made of glass fiber reinforced plastic. 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Professional set of lambda probe caps 7 parts.

Specialized attachments are used to assemble and disassemble shock absorbers.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Auxiliary sleeve for adjusting the camshaft position.

Universal spring pullers are essential for professional chassis service. 

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Lever set for upholstery clasps 27 pcs.

Device for replacing the crankshaft VW.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Professional puller for broken bolts and pins. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Quick coupling - external copper thread.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Hose clamp pliers for CLIC-R clamps.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

A device used to disassemble and set the spring bolt between the yokes of the suspension arm (rear and front). 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Bit set torx, hex, spline-40 el.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Puller with inertia hammer (impact hammer) for pulling in injectors in Mercedes CDI OM 611,612,613.

A set for pulling the injectors firmly seated in the cylinder head.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Universal extractor for extruding the injectors.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Universal kit for disassembly / squeezing bearings and bolt pins 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set for springs and brake cups.

Set of hooks and scrapers set of 5 pieces.