Tool for steering rods 32-42 mm KB03203

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

3pc Fuel Line Disconnect Set.

Self-locking pliers for cutting exhaust pipes.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Handwheel - screwdriver.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Flat band clamp pliers used in cooling circuits.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

The key for adjusting the 27-42mm steering rods.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Clutch alingment tool set 17-piece KB04227.

Devices for assembly and disassembly of multi-groove belts.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Pin drawing pliers.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

A set of filters for testing Common Rail injectors. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Professional puller for broken bolts and pins. 

Self-locking pliers for cutting exhaust pipes.

3pc Fuel Line Disconnect Set.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Puller for disassembly of O-rings and simings.

A set of tools for valve sealants.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Hand grease 120ml.

Hard tools made of glass fiber reinforced plastic. 

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Universal kit for disassembly / squeezing bearings and bolt pins 

Set of hooks and scrapers set of 5 pieces.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

13 pieces of sheet metal spoons for car body, long and short in the set.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Oil filter pliers 10".

Impact adapters.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Piston ring tools 110-160 mm.

Tongs for wristbands.

Make sure valves seat perfectly during a top-end rebuild.

Auxiliary sleeve for adjusting the camshaft position.

Keys for oil plugs 12 parts.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

108pcs Socket Tool Set YZ0804001

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

A set of plastic buckles for prying the pins.

Bit set torx, hex, spline -54 pcs KB04760

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Universal spring pullers are essential for professional chassis service. 

The BMW DIESEL belt pulley wrench.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Cable ties used in cooling circuits.

Walizka narzędziowa 171 elementów.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

The key for the timing belt tensioner VW Audi.

DSG Clutch Removal Kit for VW Group C05/0213

The set consists of 4 levers.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Hose clamp pliers for CLIC-R clamps.

46pcs Socket Tool Set.

Kit for regeneration, thread repair.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Set for 12 brake pistons, universal for most cars. 

Sandblasting gun for cabin sandblaster.

Handwheel - screwdriver.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Universal spring pullers are essential for professional chassis service. 

Crimping and cutting pliers.

Wristband pliers set of 2 pcs.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Set for dismantling the missing glow plugs KB02116.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Set for springs and brake cups.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Set of socket wrenches for 14 element filters.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Device for replacing the crankshaft VW.

The torque wrench protractor for final tightening of bolts and nuts.

Retaining ring pliers.

A set of sockets and keys for an alternator 24poz.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Specialized attachments are used to assemble and disassemble shock absorbers.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Professional set of lambda probe caps 7 parts.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Pliers for brake springs, features:

• product weight: 1 kg.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Universal extractor for extruding the injectors.

Universal set for extruding the injectors with a hydraulic cylinder.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Bit set torx, hex, spline-40 el.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Device for assembling and disassembling the wrist joint in the steering system.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Thread repair set.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Lever set for upholstery clasps 27 pcs.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The device for screwing the brake pistons.

A set of cutters for regeneration of injector slots.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Sandblasting gun for siphon sanders. The gun matches the T06505, T06510, T06520A, T06520B gritter. Includes an additional 3 ceramic nozzles with covers.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Universal two- and three-arm puller.

Specialized attachments are used to assemble and disassemble shock absorbers.

A set of filters for testing Common Rail injectors. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

The tread measuring device is designed to measure tread height in a tire.

Device for brake pistons, designed for quick assembly or disassembly of brake pistons from the brake saddle device, without damaging the self-sealing ring or piston.

The device enables quick and easy replacement of the wheel hub directly on the car, without the need to disassemble the suspension elements.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.