Universal set for extruding the injectors with a hydraulic cylinder C04/0027S

Set for 12 brake pistons, universal for most cars. 

The key for the timing belt tensioner VW Audi.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Crimping and cutting pliers.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The torque wrench protractor for final tightening of bolts and nuts.

Set for springs and brake cups.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Walizka narzędziowa 171 elementów.

46pcs Socket Tool Set.

Bit set torx, hex, spline -54 pcs KB04760

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

A set of filters for testing Common Rail injectors. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The set consists of 4 levers.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Universal spring pullers are essential for professional chassis service. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Tongs for wristbands.

Puller for disassembly of O-rings and simings.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Oil filter pliers 10".

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

108pcs Socket Tool Set YZ0804001

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A set of tools for valve sealants.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Retaining ring pliers.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Bit set torx, hex, spline-40 el.

Keys for oil plugs 12 parts.

Device for replacing the crankshaft VW.

Universal spring pullers are essential for professional chassis service. 

Universal set for extruding the injectors with a hydraulic cylinder.

Devices for assembly and disassembly of multi-groove belts.

Pliers for brake springs, features:

• product weight: 1 kg.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Handwheel - screwdriver.

A set of sockets and keys for an alternator 24poz.

Kit for regeneration, thread repair.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Specialized attachments are used to assemble and disassemble shock absorbers.

Professional set of lambda probe caps 7 parts.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Wristband pliers set of 2 pcs.

Self-locking pliers for cutting exhaust pipes.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Hand grease 120ml.

Thread repair set.

Set for 12 brake pistons, universal for most cars. 

Set of socket wrenches for 14 element filters.

Cable ties used in cooling circuits.

Impact adapters.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Pin drawing pliers.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

3pc Fuel Line Disconnect Set.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Make sure valves seat perfectly during a top-end rebuild.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Universal extractor for extruding the injectors.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

A set of cutters for regeneration of injector slots.

A set of plastic buckles for prying the pins.

The key for adjusting the 27-42mm steering rods.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Clutch alingment tool set 17-piece KB04227.

The key for the timing belt tensioner VW Audi.

Piston ring tools 110-160 mm.

Auxiliary sleeve for adjusting the camshaft position.

Professional puller for broken bolts and pins. 

Crimping and cutting pliers.

DSG Clutch Removal Kit for VW Group C05/0213

Hose clamp pliers for CLIC-R clamps.

Universal kit for disassembly / squeezing bearings and bolt pins 

The BMW DIESEL belt pulley wrench.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set of hooks and scrapers set of 5 pieces.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Set for dismantling the missing glow plugs KB02116.

The device for screwing the brake pistons.

Device for assembling and disassembling the wrist joint in the steering system.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Hard tools made of glass fiber reinforced plastic. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Zestaw naprawczy 1/2 do grzechotki CCU-0058

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Honing machine, features:

- 1/4 ",
- has 3 abrasive stones,
- for sleeve 45-88 mm,
- for embedding, e.g. in a drilling machine,
- a spring that pushes stones.

A device for the detection of steering and suspension clearances.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Pompa 600bar do siłownika hydraulicznego DX-0172.

Hydraulic pump 12T.

A set for pulling the injectors firmly seated in the cylinder head.

For removing seized or stuck Common Rail injectors

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Universal set for extruding the injectors with a hydraulic cylinder.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

13mm claw puller for Mercedes CDI injectors.

Universal extractor for extruding the injectors.

Hydraulic cylinder with through and threaded hole designed for extruding, removing DIESLA injectors for adaptation with supports eg C04/0027. 

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Set for 12 brake pistons, universal for most cars. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Bit set torx, hex, spline-40 el.