Set for regeneration, thread repair KB02232

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The key for adjusting the 27-42mm steering rods.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Flat band clamp pliers used in cooling circuits.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

A set of plastic buckles for prying the pins.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Piston ring tools 110-160 mm.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

A set of tools for valve sealants.

Bit set torx, hex, spline-40 el.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Lever set for upholstery clasps 27 pcs.

Wristband pliers set of 2 pcs.

Make sure valves seat perfectly during a top-end rebuild.

The set consists of 4 levers.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Hose clamp pliers for CLIC-R clamps.

Tongs for wristbands.

Universal spring pullers are essential for professional chassis service. 

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Thread repair set.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set for springs and brake cups.

The torque wrench protractor for final tightening of bolts and nuts.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

The BMW DIESEL belt pulley wrench.

Universal extractor for extruding the injectors.

Hand grease 120ml.

3pc Fuel Line Disconnect Set.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Pin drawing pliers.

Device for replacing the crankshaft VW.

Self-locking pliers for cutting exhaust pipes.

Universal spring pullers are essential for professional chassis service. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

46pcs Socket Tool Set.

Auxiliary sleeve for adjusting the camshaft position.

108pcs Socket Tool Set YZ0804001

Impact adapters.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A set of filters for testing Common Rail injectors. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

A set of sockets and keys for an alternator 24poz.

Handwheel - screwdriver.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Professional puller for broken bolts and pins. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Kit for regeneration, thread repair.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

A set of cutters for regeneration of injector slots.

The key for adjusting the 27-42mm steering rods.

Puller for disassembly of O-rings and simings.

Sandblasting gun for cabin sandblaster.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Universal set for extruding the injectors with a hydraulic cylinder.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Set for 12 brake pistons, universal for most cars. 

Set for dismantling the missing glow plugs KB02116.

Hard tools made of glass fiber reinforced plastic. 

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Device for assembling and disassembling the wrist joint in the steering system.

Professional set of lambda probe caps 7 parts.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

DSG Clutch Removal Kit for VW Group C05/0213

Universal kit for disassembly / squeezing bearings and bolt pins 

Retaining ring pliers.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Specialized attachments are used to assemble and disassemble shock absorbers.

Crimping and cutting pliers.

Set of socket wrenches for 14 element filters.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The key for the timing belt tensioner VW Audi.

Clutch alingment tool set 17-piece KB04227.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Pliers for brake springs, features:

• product weight: 1 kg.

Devices for assembly and disassembly of multi-groove belts.

Cable ties used in cooling circuits.

Set of hooks and scrapers set of 5 pieces.

The device for screwing the brake pistons.

Oil filter pliers 10".

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Nozzles for vacuum siphon squeezer with vacuum cleaner. The nozzle fits the PI-2 pistol from the T06528 sandblaster.

Bearing pullers designed for removing bearings, discs, drums with 3 arms.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Lever set for upholstery clasps 27 pcs.

Internal inertia puller 10-32 mm. A professional set, necessary in every workshop.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Kit for regeneration, thread repair.

Set for springs and brake cups.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head.