Auxiliary stretch belt removal tool - KBA2209

DSG Clutch Removal Kit for VW Group C05/0213

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The device for screwing the brake pistons.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Universal kit for disassembly / squeezing bearings and bolt pins 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Wristband pliers set of 2 pcs.

Bit set torx, hex, spline-40 el.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

A set of sockets and keys for an alternator 24poz.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Sandblasting gun for cabin sandblaster.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Piston ring tools 110-160 mm.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Self-locking pliers for cutting exhaust pipes.

Make sure valves seat perfectly during a top-end rebuild.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The key for the timing belt tensioner VW Audi.

The set consists of 4 levers.

Pliers for brake springs, features:

• product weight: 1 kg.

108pcs Socket Tool Set YZ0804001

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Tongs for wristbands.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The BMW DIESEL belt pulley wrench.

Universal spring pullers are essential for professional chassis service. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Universal kit for disassembly / squeezing bearings and bolt pins 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Retaining ring pliers.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Devices for assembly and disassembly of multi-groove belts.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Flat band clamp pliers used in cooling circuits.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

DSG Clutch Removal Kit for VW Group C05/0213

A set of tools for valve sealants.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

46pcs Socket Tool Set.

Set of hooks and scrapers set of 5 pieces.

A set of plastic buckles for prying the pins.

13 pieces of sheet metal spoons for car body, long and short in the set.

Device for assembling and disassembling the wrist joint in the steering system.

The torque wrench protractor for final tightening of bolts and nuts.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Professional set of lambda probe caps 7 parts.

The key for adjusting the 27-42mm steering rods.

Crimping and cutting pliers.

Device for replacing the crankshaft VW.

Specialized attachments are used to assemble and disassemble shock absorbers.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Walizka narzędziowa 171 elementów.

Universal spring pullers are essential for professional chassis service. 

Bit set torx, hex, spline -54 pcs KB04760

Thread repair set.

Clutch alingment tool set 17-piece KB04227.

Oil filter pliers 10".

Set of socket wrenches for 14 element filters.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Cable ties used in cooling circuits.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Universal set for extruding the injectors with a hydraulic cylinder.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Impact adapters.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

3pc Fuel Line Disconnect Set.

Set for dismantling the missing glow plugs KB02116.

The device for screwing the brake pistons.

Kit for regeneration, thread repair.

Auxiliary sleeve for adjusting the camshaft position.

Puller for disassembly of O-rings and simings.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Set for 12 brake pistons, universal for most cars. 

Hard tools made of glass fiber reinforced plastic. 

Hose clamp pliers for CLIC-R clamps.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Set for springs and brake cups.

Professional puller for broken bolts and pins. 

A set of filters for testing Common Rail injectors. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Handwheel - screwdriver.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Pin drawing pliers.

Universal extractor for extruding the injectors.

A set of cutters for regeneration of injector slots.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Auxiliary sleeve for adjusting the camshaft position.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

The set is used for pressing equi-axial bearings, sealants, rings, sleeves, e.g. switches, connecting rods, alnarnators, starters, etc.

Oil for pneumatic tools LUX-10.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Lever set for upholstery clasps 27 pcs.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

A set of tools for valve sealants.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Universal spring pullers are essential for professional chassis service. 

A set of plastic buckles for prying the pins.