V-Ribbed Belt Disassembly and Assembly Set KBA2304

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Professional puller for broken bolts and pins. 

A set of plastic buckles for prying the pins.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

A set of cutters for regeneration of injector slots.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Oil filter pliers 10".

Kit for regeneration, thread repair.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Set for springs and brake cups.

Tongs for wristbands.

Set for dismantling the missing glow plugs KB02116.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Professional puller for broken bolts and pins. 

Clutch alingment tool set 17-piece KB04227.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The torque wrench protractor for final tightening of bolts and nuts.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

3pc Fuel Line Disconnect Set.

Universal spring pullers are essential for professional chassis service. 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

A set of filters for testing Common Rail injectors. 

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

A set of cutters for regeneration of injector slots.

Universal extractor for extruding the injectors.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

108pcs Socket Tool Set YZ0804001

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Cable ties used in cooling circuits.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

46pcs Socket Tool Set.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

13 pieces of sheet metal spoons for car body, long and short in the set.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

The BMW DIESEL belt pulley wrench.

Flat band clamp pliers used in cooling circuits.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Set for 12 brake pistons, universal for most cars. 

Puller for disassembly of O-rings and simings.

Bit set torx, hex, spline -54 pcs KB04760

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The device for screwing the brake pistons.

Universal set for extruding the injectors with a hydraulic cylinder.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

A set of tools for valve sealants.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Wristband pliers set of 2 pcs.

Device for replacing the crankshaft VW.

Keys for oil plugs 12 parts.

A set of plastic buckles for prying the pins.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Self-locking pliers for cutting exhaust pipes.

Hose clamp pliers for CLIC-R clamps.

Universal spring pullers are essential for professional chassis service. 

Piston ring tools 110-160 mm.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Pin drawing pliers.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

A set of sockets and keys for an alternator 24poz.

The key for adjusting the 27-42mm steering rods.

Set of socket wrenches for 14 element filters.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Specialized attachments are used to assemble and disassemble shock absorbers.

Bit set torx, hex, spline-40 el.

Handwheel - screwdriver.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Thread repair set.

The key for the timing belt tensioner VW Audi.

Crimping and cutting pliers.

Hand grease 120ml.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Impact adapters.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Lever set for upholstery clasps 27 pcs.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Pliers for brake springs, features:

• product weight: 1 kg.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Devices for assembly and disassembly of multi-groove belts.

Make sure valves seat perfectly during a top-end rebuild.

Retaining ring pliers.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

DSG Clutch Removal Kit for VW Group C05/0213

Device for assembling and disassembling the wrist joint in the steering system.

Universal kit for disassembly / squeezing bearings and bolt pins 

The set consists of 4 levers.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Sandblasting gun for cabin sandblaster.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Walizka narzędziowa 171 elementów.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Sworzeń 8x46 CCU-0062

Universal extractor for extruding the injectors.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Press for extruding bolts with a 12 ton hydraulic cylinder.

Press, puller for pins, sleeves without adapters C02/0135.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Lever set for upholstery clasps 27 pcs.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

46pcs Socket Tool Set.

Thread repair set.