DSG Clutch Removal Kit for VW Group C05/0213

Bit set torx, hex, spline -54 pcs KB04760

Auxiliary sleeve for adjusting the camshaft position.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Walizka narzędziowa 171 elementów.

Pliers for brake springs, features:

• product weight: 1 kg.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

108pcs Socket Tool Set YZ0804001

Bit set torx, hex, spline-40 el.

Hose clamp pliers for CLIC-R clamps.

Universal spring pullers are essential for professional chassis service. 

Universal spring pullers are essential for professional chassis service. 

Set for 12 brake pistons, universal for most cars. 

Professional puller for broken bolts and pins. 

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

46pcs Socket Tool Set.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Impact adapters.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Wristband pliers set of 2 pcs.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Professional set of lambda probe caps 7 parts.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

DSG Clutch Removal Kit for VW Group C05/0213

Set of hooks and scrapers set of 5 pieces.

The key for the timing belt tensioner VW Audi.

13 pieces of sheet metal spoons for car body, long and short in the set.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Universal kit for disassembly / squeezing bearings and bolt pins 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The device for screwing the brake pistons.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Flat band clamp pliers used in cooling circuits.

A set of sockets and keys for an alternator 24poz.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Self-locking pliers for cutting exhaust pipes.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The set consists of 4 levers.

Bit set torx, hex, spline -54 pcs KB04760

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

A set of tools for valve sealants.

Keys for oil plugs 12 parts.

Set for dismantling the missing glow plugs KB02116.

Cable ties used in cooling circuits.

A set of filters for testing Common Rail injectors. 

The BMW DIESEL belt pulley wrench.

Auxiliary sleeve for adjusting the camshaft position.

Set of socket wrenches for 14 element filters.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Universal extractor for extruding the injectors.

Specialized attachments are used to assemble and disassemble shock absorbers.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A set of cutters for regeneration of injector slots.

Make sure valves seat perfectly during a top-end rebuild.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Hand grease 120ml.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Thread repair set.

Set for springs and brake cups.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Piston ring tools 110-160 mm.

Tongs for wristbands.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Crimping and cutting pliers.

Device for replacing the crankshaft VW.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Universal set for extruding the injectors with a hydraulic cylinder.

Sandblasting gun for cabin sandblaster.

A set of plastic buckles for prying the pins.

3pc Fuel Line Disconnect Set.

Device for assembling and disassembling the wrist joint in the steering system.

Oil filter pliers 10".

Puller for disassembly of O-rings and simings.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Clutch alingment tool set 17-piece KB04227.

Lever set for upholstery clasps 27 pcs.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Hard tools made of glass fiber reinforced plastic. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Kit for regeneration, thread repair.

Retaining ring pliers.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Handwheel - screwdriver.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Hand grease 120ml.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Sandblasting gun for cabin sandblaster.

13mm claw puller for Mercedes CDI injectors.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Universal set for extruding the injectors with a hydraulic cylinder.

Universal kit for disassembly / squeezing bearings and bolt pins 

13 pieces of sheet metal spoons for car body, long and short in the set.

Universal spring pullers are essential for professional chassis service. 

108pcs Socket Tool Set YZ0804001

Clutch alingment tool set 17-piece KB04227.

Universal spring pullers are essential for professional chassis service.