Set of punching pins KB04028

Keys for oil plugs 12 parts.

Hose clamp pliers for CLIC-R clamps.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Set of hooks and scrapers set of 5 pieces.

The device for screwing the brake pistons.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Flat band clamp pliers used in cooling circuits.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Clutch alingment tool set 17-piece KB04227.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

46pcs Socket Tool Set.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

The torque wrench protractor for final tightening of bolts and nuts.

Pin drawing pliers.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Piston ring tools 110-160 mm.

Handwheel - screwdriver.

Bit set torx, hex, spline -54 pcs KB04760

The key for the timing belt tensioner VW Audi.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Thread repair set.

Keys for oil plugs 12 parts.

Wristband pliers set of 2 pcs.

Set for dismantling the missing glow plugs KB02116.

Auxiliary sleeve for adjusting the camshaft position.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Universal extractor for extruding the injectors.

Hose clamp pliers for CLIC-R clamps.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Hard tools made of glass fiber reinforced plastic. 

Set for 12 brake pistons, universal for most cars. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Hand grease 120ml.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The set consists of 4 levers.

Lever set for upholstery clasps 27 pcs.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Cable ties used in cooling circuits.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Self-locking pliers for cutting exhaust pipes.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Walizka narzędziowa 171 elementów.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Puller for disassembly of O-rings and simings.

Bit set torx, hex, spline-40 el.

Oil filter pliers 10".

13 pieces of sheet metal spoons for car body, long and short in the set.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Specialized attachments are used to assemble and disassemble shock absorbers.

Universal spring pullers are essential for professional chassis service. 

DSG Clutch Removal Kit for VW Group C05/0213

Device for assembling and disassembling the wrist joint in the steering system.

A set of cutters for regeneration of injector slots.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Sandblasting gun for cabin sandblaster.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

The BMW DIESEL belt pulley wrench.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Universal spring pullers are essential for professional chassis service. 

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Universal kit for disassembly / squeezing bearings and bolt pins 

Crimping and cutting pliers.

Make sure valves seat perfectly during a top-end rebuild.

Set of socket wrenches for 14 element filters.

A set of plastic buckles for prying the pins.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Universal set for extruding the injectors with a hydraulic cylinder.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Kit for regeneration, thread repair.

Device for replacing the crankshaft VW.

Set of hooks and scrapers set of 5 pieces.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

3pc Fuel Line Disconnect Set.

Tongs for wristbands.

Devices for assembly and disassembly of multi-groove belts.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set for springs and brake cups.

A set of tools for valve sealants.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A set of filters for testing Common Rail injectors. 

A set of sockets and keys for an alternator 24poz.

108pcs Socket Tool Set YZ0804001

Retaining ring pliers.

Impact adapters.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Polyurethane PU 12x8 blue with a meter, designed for pneumatic, hydraulic and fuel systems.

Device for blocking the flywheel, clutch disc for motorcycles, an additional screw to lock the device in the desired position.

A set of plastic buckles for prying the pins.

General instructions for health and safety Workshops for vulcanization, work in accordance with the PIP and Health and Safety regulations.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Bushing, adapter fi 57 for key C01/0100 to the belt pulley on the BMW diesel C01/0134.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

108pcs Socket Tool Set YZ0804001

Professional set of lambda probe caps 7 parts.

A set of filters for testing Common Rail injectors. 

46pcs Socket Tool Set.