Air grease gun 400CC T3023

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Flat band clamp pliers used in cooling circuits.

Impact adapters.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Universal spring pullers are essential for professional chassis service. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Sandblasting gun for cabin sandblaster.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The torque wrench protractor for final tightening of bolts and nuts.

3pc Fuel Line Disconnect Set.

The device for screwing the brake pistons.

The set consists of 4 levers.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Oil filter pliers 10".

Set for springs and brake cups.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

A set of cutters for regeneration of injector slots.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Device for replacing the crankshaft VW.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Hose clamp pliers for CLIC-R clamps.

108pcs Socket Tool Set YZ0804001

Specialized attachments are used to assemble and disassemble shock absorbers.

Devices for assembly and disassembly of multi-groove belts.

Keys for oil plugs 12 parts.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Tongs for wristbands.

Hard tools made of glass fiber reinforced plastic. 

Bit set torx, hex, spline-40 el.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

13 pieces of sheet metal spoons for car body, long and short in the set.

Make sure valves seat perfectly during a top-end rebuild.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Professional set of lambda probe caps 7 parts.

Universal spring pullers are essential for professional chassis service. 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Universal extractor for extruding the injectors.

A set of filters for testing Common Rail injectors. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Set for dismantling the missing glow plugs KB02116.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Hand grease 120ml.

Piston ring tools 110-160 mm.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Set of socket wrenches for 14 element filters.

Impact adapters.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

A set of tools for valve sealants.

Lever set for upholstery clasps 27 pcs.

Bit set torx, hex, spline -54 pcs KB04760

The key for adjusting the 27-42mm steering rods.

Kit for regeneration, thread repair.

Thread repair set.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Auxiliary sleeve for adjusting the camshaft position.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The BMW DIESEL belt pulley wrench.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Crimping and cutting pliers.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A set of plastic buckles for prying the pins.

Pin drawing pliers.

The key for the timing belt tensioner VW Audi.

DSG Clutch Removal Kit for VW Group C05/0213

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Retaining ring pliers.

Cable ties used in cooling circuits.

A set of sockets and keys for an alternator 24poz.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Handwheel - screwdriver.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Pliers for brake springs, features:

• product weight: 1 kg.

Self-locking pliers for cutting exhaust pipes.

Walizka narzędziowa 171 elementów.

Set for 12 brake pistons, universal for most cars. 

Device for assembling and disassembling the wrist joint in the steering system.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Clutch alingment tool set 17-piece KB04227.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

46pcs Socket Tool Set.

Universal kit for disassembly / squeezing bearings and bolt pins 

Professional puller for broken bolts and pins. 

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Universal set for extruding the injectors with a hydraulic cylinder.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Flat band clamp pliers used in cooling circuits.

Puller for disassembly of O-rings and simings.

Three-leg pullers designed for removing bearings, discs, drums with 3 arms. 

Przycisk spustowy CCU-0065

Bit set torx, hex, spline -54 pcs KB04760

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Three-jaw pullers designed for removing bearings, discs, drums with 3 arms. 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

A workshop bench made of solid plastic. It works well during workshop work.