Hook bender KB01101

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Retaining ring pliers.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Universal extractor for extruding the injectors.

Keys for oil plugs 12 parts.

A set of tools for valve sealants.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

DSG Clutch Removal Kit for VW Group C05/0213

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Wristband pliers set of 2 pcs.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Walizka narzędziowa 171 elementów.

Cable ties used in cooling circuits.

Universal spring pullers are essential for professional chassis service. 

Flat band clamp pliers used in cooling circuits.

A set of plastic buckles for prying the pins.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Pliers for brake springs, features:

• product weight: 1 kg.

A set of sockets and keys for an alternator 24poz.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Handwheel - screwdriver.

108pcs Socket Tool Set YZ0804001

Kit for regeneration, thread repair.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Auxiliary sleeve for adjusting the camshaft position.

The key for adjusting the 27-42mm steering rods.

Sandblasting gun for cabin sandblaster.

Professional puller for broken bolts and pins. 

Retaining ring pliers.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Lever set for upholstery clasps 27 pcs.

Professional set of lambda probe caps 7 parts.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Hose clamp pliers for CLIC-R clamps.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Thread repair set.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Impact adapters.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

The BMW DIESEL belt pulley wrench.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Self-locking pliers for cutting exhaust pipes.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Set for springs and brake cups.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Specialized attachments are used to assemble and disassemble shock absorbers.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Device for assembling and disassembling the wrist joint in the steering system.

Piston ring tools 110-160 mm.

3pc Fuel Line Disconnect Set.

Oil filter pliers 10".

Set of socket wrenches for 14 element filters.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Clutch alingment tool set 17-piece KB04227.

Set for 12 brake pistons, universal for most cars. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The device for screwing the brake pistons.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Hand grease 120ml.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Puller for disassembly of O-rings and simings.

Bit set torx, hex, spline -54 pcs KB04760

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Device for replacing the crankshaft VW.

Universal kit for disassembly / squeezing bearings and bolt pins 

The set consists of 4 levers.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Set of hooks and scrapers set of 5 pieces.

Crimping and cutting pliers.

A set of cutters for regeneration of injector slots.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Hard tools made of glass fiber reinforced plastic. 

Universal extractor for extruding the injectors.

Pin drawing pliers.

Devices for assembly and disassembly of multi-groove belts.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Bit set torx, hex, spline-40 el.

Tongs for wristbands.

Universal spring pullers are essential for professional chassis service. 

The torque wrench protractor for final tightening of bolts and nuts.

A set of filters for testing Common Rail injectors. 

46pcs Socket Tool Set.

Set for dismantling the missing glow plugs KB02116.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

13 pieces of sheet metal spoons for car body, long and short in the set.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The key for the timing belt tensioner VW Audi.

Self-locking pliers for cutting exhaust pipes.

Hard tools made of glass fiber reinforced plastic. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.