Car CV Joint Boot Clamp Banding Plier KB04121

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Set for dismantling the missing glow plugs KB02116.

Flat band clamp pliers used in cooling circuits.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Flat band clamp pliers used in cooling circuits.

Pin drawing pliers.

3pc Fuel Line Disconnect Set.

Self-locking pliers for cutting exhaust pipes.

Impact adapters.

3pc Fuel Line Disconnect Set.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The torque wrench protractor for final tightening of bolts and nuts.

Set for 12 brake pistons, universal for most cars. 

The key for the timing belt tensioner VW Audi.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

A set of cutters for regeneration of injector slots.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Retaining ring pliers.

3pc Fuel Line Disconnect Set.

Pin drawing pliers.

Universal kit for disassembly / squeezing bearings and bolt pins 

Professional puller for broken bolts and pins. 

108pcs Socket Tool Set YZ0804001

Set of socket wrenches for 14 element filters.

Device for assembling and disassembling the wrist joint in the steering system.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Kit for regeneration, thread repair.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Devices for assembly and disassembly of multi-groove belts.

The set consists of 4 levers.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Impact adapters.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Flat band clamp pliers used in cooling circuits.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Specialized attachments are used to assemble and disassemble shock absorbers.

The BMW DIESEL belt pulley wrench.

Wristband pliers set of 2 pcs.

Universal set for extruding the injectors with a hydraulic cylinder.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Make sure valves seat perfectly during a top-end rebuild.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Set for dismantling the missing glow plugs KB02116.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Set of hooks and scrapers set of 5 pieces.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Oil filter pliers 10".

Professional set of lambda probe caps 7 parts.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Universal spring pullers are essential for professional chassis service. 

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Universal spring pullers are essential for professional chassis service. 

Universal extractor for extruding the injectors.

Clutch alingment tool set 17-piece KB04227.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Set for springs and brake cups.

Self-locking pliers for cutting exhaust pipes.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

13 pieces of sheet metal spoons for car body, long and short in the set.

Walizka narzędziowa 171 elementów.

Bit set torx, hex, spline-40 el.

Cable ties used in cooling circuits.

Puller for disassembly of O-rings and simings.

Sandblasting gun for cabin sandblaster.

Lever set for upholstery clasps 27 pcs.

The device for screwing the brake pistons.

Thread repair set.

Auxiliary sleeve for adjusting the camshaft position.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

A set of plastic buckles for prying the pins.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Hose clamp pliers for CLIC-R clamps.

DSG Clutch Removal Kit for VW Group C05/0213

Bit set torx, hex, spline -54 pcs KB04760

Tongs for wristbands.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Hand grease 120ml.

Pliers for brake springs, features:

• product weight: 1 kg.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

A set of sockets and keys for an alternator 24poz.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Crimping and cutting pliers.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Piston ring tools 110-160 mm.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

A set of tools for valve sealants.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Keys for oil plugs 12 parts.

A set of filters for testing Common Rail injectors. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Workshop trolley.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Sprężyna 15/76 CCU-0049

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Hard tools made of glass fiber reinforced plastic. 

Retaining ring pliers.

Pin drawing pliers.

Set for springs and brake cups.