Ring Clamping Clamps pliers KB04083

A set of tools for valve sealants.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Walizka narzędziowa 171 elementów.

Flat band clamp pliers used in cooling circuits.

Flat band clamp pliers used in cooling circuits.

3pc Fuel Line Disconnect Set.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Pin drawing pliers.

Retaining ring pliers.

Hose clamp pliers for CLIC-R clamps.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Cable ties used in cooling circuits.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Hose clamp pliers for CLIC-R clamps.

Set for 12 brake pistons, universal for most cars. 

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Sandblasting gun for cabin sandblaster.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Piston ring tools 110-160 mm.

Self-locking pliers for cutting exhaust pipes.

Lever set for upholstery clasps 27 pcs.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Tongs for wristbands.

Kit for regeneration, thread repair.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Clutch alingment tool set 17-piece KB04227.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Bit set torx, hex, spline-40 el.

46pcs Socket Tool Set.

The set consists of 4 levers.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

The torque wrench protractor for final tightening of bolts and nuts.

A set of cutters for regeneration of injector slots.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Set for dismantling the missing glow plugs KB02116.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Professional puller for broken bolts and pins. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

A set of filters for testing Common Rail injectors. 

Crimping and cutting pliers.

Wristband pliers set of 2 pcs.

Thread repair set.

Devices for assembly and disassembly of multi-groove belts.

13 pieces of sheet metal spoons for car body, long and short in the set.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

108pcs Socket Tool Set YZ0804001

The key for the timing belt tensioner VW Audi.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Hard tools made of glass fiber reinforced plastic. 

Set of hooks and scrapers set of 5 pieces.

Bit set torx, hex, spline -54 pcs KB04760

Universal spring pullers are essential for professional chassis service. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Universal set for extruding the injectors with a hydraulic cylinder.

DSG Clutch Removal Kit for VW Group C05/0213

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

3pc Fuel Line Disconnect Set.

Impact adapters.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Hand grease 120ml.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

A set of plastic buckles for prying the pins.

Set for springs and brake cups.

A set of sockets and keys for an alternator 24poz.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Pin drawing pliers.

Oil filter pliers 10".

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Device for assembling and disassembling the wrist joint in the steering system.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Universal spring pullers are essential for professional chassis service. 

Pliers for brake springs, features:

• product weight: 1 kg.

A set of tools for valve sealants.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Set of socket wrenches for 14 element filters.

Device for replacing the crankshaft VW.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Specialized attachments are used to assemble and disassemble shock absorbers.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

The device for screwing the brake pistons.

Flat band clamp pliers used in cooling circuits.

Handwheel - screwdriver.

Keys for oil plugs 12 parts.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Puller for disassembly of O-rings and simings.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Universal extractor for extruding the injectors.

Universal kit for disassembly / squeezing bearings and bolt pins 

Retaining ring pliers.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The BMW DIESEL belt pulley wrench.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

The key for adjusting the 27-42mm steering rods.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Make sure valves seat perfectly during a top-end rebuild.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Walizka narzędziowa 171 elementów.

Cable ties used in cooling circuits.

Keys for oil plugs 12 parts.

Adapter for extracting TDI PD-PD pump / injectors.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

108pcs Socket Tool Set YZ0804001

Press, puller for pins, sleeves without adapters for a hydraulic cylinder.

Kit for regeneration, thread repair.

Hand grease 120ml.

Sprężyna 118/15 CCU-0051

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Pin drawing pliers.

Piston ring tools 110-160 mm.

Pliers for brake springs, features:

• product weight: 1 kg.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.