Puller ball studs - for universal joints. KB04064

Hose clamp pliers for CLIC-R clamps.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Tongs for wristbands.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

3pc Fuel Line Disconnect Set.

Pin drawing pliers.

Self-locking pliers for cutting exhaust pipes.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Flat band clamp pliers used in cooling circuits.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Auxiliary sleeve for adjusting the camshaft position.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Specialized attachments are used to assemble and disassemble shock absorbers.

Thread repair set.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

A set of filters for testing Common Rail injectors. 

Puller for disassembly of O-rings and simings.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The device for screwing the brake pistons.

Set of socket wrenches for 14 element filters.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Retaining ring pliers.

Set for dismantling the missing glow plugs KB02116.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Bit set torx, hex, spline -54 pcs KB04760

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Impact adapters.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Keys for oil plugs 12 parts.

Walizka narzędziowa 171 elementów.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Piston ring tools 110-160 mm.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Hand grease 120ml.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Set for springs and brake cups.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Crimping and cutting pliers.

Bit set torx, hex, spline-40 el.

13 pieces of sheet metal spoons for car body, long and short in the set.

46pcs Socket Tool Set.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

A set of tools for valve sealants.

Professional puller for broken bolts and pins. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Kit for regeneration, thread repair.

The set consists of 4 levers.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Universal extractor for extruding the injectors.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Pliers for brake springs, features:

• product weight: 1 kg.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Set for 12 brake pistons, universal for most cars. 

Tongs for wristbands.

Devices for assembly and disassembly of multi-groove belts.

The key for the timing belt tensioner VW Audi.

Pin drawing pliers.

DSG Clutch Removal Kit for VW Group C05/0213

Universal kit for disassembly / squeezing bearings and bolt pins 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Cable ties used in cooling circuits.

Device for replacing the crankshaft VW.

Make sure valves seat perfectly during a top-end rebuild.

Hard tools made of glass fiber reinforced plastic. 

108pcs Socket Tool Set YZ0804001

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Universal spring pullers are essential for professional chassis service. 

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The BMW DIESEL belt pulley wrench.

Oil filter pliers 10".

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Flat band clamp pliers used in cooling circuits.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Sandblasting gun for cabin sandblaster.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Handwheel - screwdriver.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Universal spring pullers are essential for professional chassis service. 

Hose clamp pliers for CLIC-R clamps.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Clutch alingment tool set 17-piece KB04227.

A set of plastic buckles for prying the pins.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

The torque wrench protractor for final tightening of bolts and nuts.

A set of cutters for regeneration of injector slots.

The key for adjusting the 27-42mm steering rods.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Self-locking pliers for cutting exhaust pipes.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set of hooks and scrapers set of 5 pieces.

A set of sockets and keys for an alternator 24poz.

3pc Fuel Line Disconnect Set.

Impact adapters.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

The compression pressure tester is used to measure the compression pressure in the cylinders of gasoline engines using a pressure gauge with a range of 0-20 bar and terminals adapted for this.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Handwheel - screwdriver.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Adapters, press bushings for the upper links of the swingarm, movano, master, Interstar.

Press, puller for pins, sleeves without adapters C02/0135.

Puller inertial puller. Professional tinsmith, inertia hammer together with a set of connections, brackets, hooks and adapters for car body repairs.

A set for pulling the injectors firmly seated in the cylinder head.