21pc Oil Drain Sump Plug Socket Key Tool Set Gearbox 3/8" Dr Wrench, KB10131

Set of socket wrenches for 14 element filters.

The key for adjusting the 27-42mm steering rods.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Devices for assembly and disassembly of multi-groove belts.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

A set of cutters for regeneration of injector slots.

Thread repair set.

Professional puller for broken bolts and pins. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The device for screwing the brake pistons.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Oil filter pliers 10".

Device for replacing the crankshaft VW.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Tongs for wristbands.

A set of tools for valve sealants.

Clutch alingment tool set 17-piece KB04227.

Puller for disassembly of O-rings and simings.

Sandblasting gun for cabin sandblaster.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

108pcs Socket Tool Set YZ0804001

Device for assembling and disassembling the wrist joint in the steering system.

Set of socket wrenches for 14 element filters.

Make sure valves seat perfectly during a top-end rebuild.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Set for dismantling the missing glow plugs KB02116.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Bit set torx, hex, spline-40 el.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Hand grease 120ml.

Hard tools made of glass fiber reinforced plastic. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

The BMW DIESEL belt pulley wrench.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Universal extractor for extruding the injectors.

Handwheel - screwdriver.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Universal spring pullers are essential for professional chassis service. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Pliers for brake springs, features:

• product weight: 1 kg.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Devices for assembly and disassembly of multi-groove belts.

Set for springs and brake cups.

Specialized attachments are used to assemble and disassemble shock absorbers.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Crimping and cutting pliers.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Cable ties used in cooling circuits.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Set of hooks and scrapers set of 5 pieces.

Wristband pliers set of 2 pcs.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

A set of filters for testing Common Rail injectors. 

13 pieces of sheet metal spoons for car body, long and short in the set.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Hose clamp pliers for CLIC-R clamps.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Kit for regeneration, thread repair.

Bit set torx, hex, spline -54 pcs KB04760

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The key for the timing belt tensioner VW Audi.

Professional set of lambda probe caps 7 parts.

A set of sockets and keys for an alternator 24poz.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Universal spring pullers are essential for professional chassis service. 

Walizka narzędziowa 171 elementów.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Set for 12 brake pistons, universal for most cars. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Self-locking pliers for cutting exhaust pipes.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Auxiliary sleeve for adjusting the camshaft position.

46pcs Socket Tool Set.

Impact adapters.

Universal kit for disassembly / squeezing bearings and bolt pins 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Universal set for extruding the injectors with a hydraulic cylinder.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Keys for oil plugs 12 parts.

The torque wrench protractor for final tightening of bolts and nuts.

Retaining ring pliers.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

3pc Fuel Line Disconnect Set.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Lever set for upholstery clasps 27 pcs.

Pin drawing pliers.

Piston ring tools 110-160 mm.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Flat band clamp pliers used in cooling circuits.

The set consists of 4 levers.

The key for adjusting the 27-42mm steering rods.

DSG Clutch Removal Kit for VW Group C05/0213

Universal spring pullers are essential for professional chassis service. 

Sworzeń 163/30 CCU-0050

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Sworzeń 8x33 CCU-0061

Oil filter pliers 10".

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.