High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. The key length is 250mm.
46pcs Socket Tool Set.
Hard tools made of glass fiber reinforced plastic.
A set of plastic buckles for prying the pins.
The device for screwing the brake pistons.
Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.
Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.
Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.
The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N).
Make sure valves seat perfectly during a top-end rebuild.
A set of filters for testing Common Rail injectors.
Universal spring pullers are essential for professional chassis service.
Kit for regeneration, thread repair.
The key for adjusting the 27-42mm steering rods.
Universal extractor for extruding the injectors.
The key for the timing belt tensioner VW Audi.
Application: dismantling of valves in OHV and OHC engines, without dismantling the head.
Device for assembling and disassembling the wrist joint in the steering system.
A set of tools for valve sealants.
A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials.
The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.
Clutch alingment tool set 17-piece KB04227.
A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.
Pliers for quick and easy assembly and disassembly of sealants on the motor head.
Piston ring tools 110-160 mm.
Bit set torx, hex, spline -54 pcs KB04760
Hand grease 120ml.
A set of plastic buckles for prying the pins.
Sandblasting gun for cabin sandblaster.
Wristband pliers set of 2 pcs.
Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.
Impact adapters.
The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.
Set for springs and brake cups.
Hose clamp pliers for CLIC-R clamps.
Universal kit for disassembly / squeezing bearings and bolt pins
The device is designed for precise measurements of the curvature of the front suspension support pipes.
Impact screwdriver with a shank and four tips in a practical plastic organizer.
The professional vacuum pump produces pressure and vacuum, designed for checking:
- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.
Cable ties used in cooling circuits.
A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees.
Hard tools made of glass fiber reinforced plastic.
Stand for mounting the engine 900 kg, workshop helper for working with the engine.
High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.
Professional puller for broken bolts and pins.
The set is used for setting and installing bearings and hubs, for sleeve and shaft.
13 pieces of sheet metal spoons for car body, long and short in the set.
The torque wrench protractor for final tightening of bolts and nuts.
The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat.
Keys for oil plugs 12 parts.
The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.
Set for 12 brake pistons, universal for most cars.
The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.
A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws.
Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together.
Device for replacing the crankshaft VW.
Universal spring pullers are essential for professional chassis service.
The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.
Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.
Specialized attachments are used to assemble and disassemble shock absorbers.
Professional set of lambda probe caps 7 parts.
Tongs for wristbands.
Walizka narzędziowa 171 elementów.
Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.
Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.
Thread repair set.
A professional set of keys for dismantling radio receivers in cars, indispensable in car services.
Mounting and dismounting kit for driveshaft with 295 mm bearings.
Crimping and cutting pliers.
High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm.
Pin drawing pliers.
The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.
Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.
A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines.
The BMW DIESEL belt pulley wrench has a diameter of 57mm.
Universal set for extruding the injectors with a hydraulic cylinder.
Auxiliary sleeve for adjusting the camshaft position.
Bit set torx, hex, spline-40 el.
Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.
The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel.
Retaining ring pliers.
Flat band clamp pliers used in cooling circuits.
This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.
Puller for disassembly of O-rings and simings.
Self-locking pliers for cutting exhaust pipes.
Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.
The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N).
Handwheel - screwdriver.
The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.
Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.
Set for dismantling the missing glow plugs KB02116.
Lever set for upholstery clasps 27 pcs.
10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.
DSG Clutch Removal Kit for VW Group C05/0213
Pliers for brake springs, features:
46pcs Socket Tool Set.
Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.
The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.
Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.
A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.
A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.
Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.
A set of cutters for regeneration of injector slots.
The BMW DIESEL belt pulley wrench.
Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.
Special kit for assembling and disassembling silent blocks in the front control arm VAG.
Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.
Devices for assembly and disassembly of multi-groove belts.
Oil filter pliers 10".
The device for screwing the brake pistons.
H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.
Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164
Set of socket wrenches for 14 element filters.
Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.
Sworzeń 8x46 CCU-0062
The set consists of 4 levers.
Press for extruding bolts with a 12 ton hydraulic cylinder.
The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.
Clutch alingment tool set 17-piece KB04227.
Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.
The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.
The torque wrench protractor for final tightening of bolts and nuts.
A set of cutters for regeneration of injector slots.
The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.
Clutch alingment tool set 17-piece KB04227.
Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.
The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.
The torque wrench protractor for final tightening of bolts and nuts.
High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm.
The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.
High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.
Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.
Opening days:
Mondays to Fridays
8:00am - 5:00pm
Headquarters
CASTEX Anna Bednarz
ul. Ludwikowo 2C
85-502 Bydgoszcz, Poland
Call Us
+48 52 515 64 22
+48 500 616 500
Write Us
biuro@castex.pl
office@castex.pl
Szanowna Klientko, Szanowny Kliencie na naszych stronach używamy technologii, takich jak pliki cookie, do zbierania i przetwarzania danych osobowych w celu personalizowania treści i reklam oraz analizowania ruchu na stronach i w Internecie. Pragniemy zapoznać Cię ze szczegółami stosowanych przez nas technologii oraz z przepisami, które od 25.05 2018 r. weszły do użycia na terenie całej UE, tak aby dać Ci pełną wiedzę i komfort w korzystaniu z naszych usług internetowych. Zapoznaj się z poniższymi informacjami przed przejściem do sklepu. Klikając przycisk „Akceptuję” lub zamykając to okno zgadzasz się na postanowienia zawarte w naszej polityce prywatności i polityce plików cookies.
Akceptuj Więcej informacji Odrzuć