Brake thread repair kit M9x1 .25 VW OPEL FORD - KBB4021

Set for dismantling the missing glow plugs KB02116.

Universal kit for disassembly / squeezing bearings and bolt pins 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

A set of filters for testing Common Rail injectors. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Auxiliary sleeve for adjusting the camshaft position.

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Specialized attachments are used to assemble and disassemble shock absorbers.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Self-locking pliers for cutting exhaust pipes.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

A set of sockets and keys for an alternator 24poz.

Walizka narzędziowa 171 elementów.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Hand grease 120ml.

Set of hooks and scrapers set of 5 pieces.

The torque wrench protractor for final tightening of bolts and nuts.

Set of socket wrenches for 14 element filters.

Universal spring pullers are essential for professional chassis service. 

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

13 pieces of sheet metal spoons for car body, long and short in the set.

108pcs Socket Tool Set YZ0804001

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

Puller for disassembly of O-rings and simings.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Oil filter pliers 10".

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Devices for assembly and disassembly of multi-groove belts.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Hard tools made of glass fiber reinforced plastic. 

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Thread repair set.

Tongs for wristbands.

Wristband pliers set of 2 pcs.

A set of cutters for regeneration of injector slots.

Hose clamp pliers for CLIC-R clamps.

Bit set torx, hex, spline-40 el.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

The BMW DIESEL belt pulley wrench.

A set of tools for valve sealants.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The set consists of 4 levers.

Set for 12 brake pistons, universal for most cars. 

Cable ties used in cooling circuits.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Retaining ring pliers.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Impact adapters.

Handwheel - screwdriver.

Bit set torx, hex, spline -54 pcs KB04760

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The key for the timing belt tensioner VW Audi.

The key for adjusting the 27-42mm steering rods.

Device for assembling and disassembling the wrist joint in the steering system.

Crimping and cutting pliers.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Universal set for extruding the injectors with a hydraulic cylinder.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

DSG Clutch Removal Kit for VW Group C05/0213

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Keys for oil plugs 12 parts.

Sandblasting gun for cabin sandblaster.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Clutch alingment tool set 17-piece KB04227.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Pin drawing pliers.

Set for springs and brake cups.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Flat band clamp pliers used in cooling circuits.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Universal kit for disassembly / squeezing bearings and bolt pins 

Universal spring pullers are essential for professional chassis service. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

46pcs Socket Tool Set.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Device for replacing the crankshaft VW.

Professional set of lambda probe caps 7 parts.

Make sure valves seat perfectly during a top-end rebuild.

Professional puller for broken bolts and pins. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

A set of plastic buckles for prying the pins.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

Universal extractor for extruding the injectors.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

3pc Fuel Line Disconnect Set.

The device for screwing the brake pistons.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

The meter is designed to measure fuel pressure in low- and high-pressure systems. The kit includes two sensors for high and low pressure applications.

Device for blocking the flywheel, clutch disc for motorcycles, an additional screw to lock the device in the desired position.

The key for the timing belt tensioner VW Audi.

Sandblasting gun for cabin sandblaster.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Zestaw do ściągania sprężyn McPherson zarówno w samochodach osobowych jak i dostawczych.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Puller of VW Polo Fabia crankshaft.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.