Thread repair set KB04155

Universal spring pullers are essential for professional chassis service. 

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Single step double piston compressor oil tank with a capacity of 200 liters of capacity 320 l/min.

Zestaw naprawczy do błyskawicznej naprawy opon, wersja standard  od CASTEX.

Automatic wheel balancer CASB95 for passenger cars, vans and motorcycle.

A set of plastic buckles for prying the pins.

3pc Timing Belt Double Pin Wrenches Tools Set For VW&AUDI 1,9TDI PD

The key for adjusting the 27-42mm steering rods.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Professional set of lambda probe caps 7 parts.

Set for dismantling the missing glow plugs KB02116.

Walizka narzędziowa 171 elementów.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Retaining ring pliers.

The set consists of 4 levers.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Specialized attachments are used to assemble and disassemble shock absorbers.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Wristband pliers set of 2 pcs.

Hose clamp pliers for CLIC-R clamps.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Pliers for brake springs, features:

• product weight: 1 kg.

A set of filters for testing Common Rail injectors. 

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

The key for adjusting the 27-42mm steering rods.

Thread repair set.

Impact adapters.

Universal extractor for extruding the injectors.

Hand grease 120ml.

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

Device for replacing the crankshaft VW.

The key for the timing belt tensioner VW Audi.

Lever set for upholstery clasps 27 pcs.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

46pcs Socket Tool Set.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

A set of cutters for regeneration of injector slots.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

Kit for regeneration, thread repair.

Professional set of lambda probe caps 7 parts.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Crimping and cutting pliers.

Pin drawing pliers.

Keys for oil plugs 12 parts.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Bit set torx, hex, spline -54 pcs KB04760

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

108pcs Socket Tool Set YZ0804001

A set of sockets and keys for an alternator 24poz.

Universal kit for disassembly / squeezing bearings and bolt pins 

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Set for springs and brake cups.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Puller for disassembly of O-rings and simings.

Hard tools made of glass fiber reinforced plastic. 

Universal spring pullers are essential for professional chassis service. 

Cable ties used in cooling circuits.

Universal spring pullers are essential for professional chassis service. 

Make sure valves seat perfectly during a top-end rebuild.

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Self-locking pliers for cutting exhaust pipes.

Tongs for wristbands.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Device for assembling and disassembling the wrist joint in the steering system.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

3pc Fuel Line Disconnect Set.

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

The BMW DIESEL belt pulley wrench.

Auxiliary sleeve for adjusting the camshaft position.

Handwheel - screwdriver.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The device for screwing the brake pistons.

Universal set for extruding the injectors with a hydraulic cylinder.

Clutch alingment tool set 17-piece KB04227.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Devices for assembly and disassembly of multi-groove belts.

Set for 12 brake pistons, universal for most cars. 

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Sandblasting gun for cabin sandblaster.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

Bit set torx, hex, spline-40 el.

A set of plastic buckles for prying the pins.

Flat band clamp pliers used in cooling circuits.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

DSG Clutch Removal Kit for VW Group C05/0213

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

A set of tools for valve sealants.

Professional puller for broken bolts and pins. 

Set of hooks and scrapers set of 5 pieces.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Set of socket wrenches for 14 element filters.

The torque wrench protractor for final tightening of bolts and nuts.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Sandblasting gun for siphon sanders. The gun matches the T06505, T06510, T06520A, T06520B gritter. Includes an additional 3 ceramic nozzles with covers.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Universal spring pullers are essential for professional chassis service. 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Transport Trolley 8T.

The device for screwing the brake pistons.

A set of cutters for regeneration of injector slots.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Oil for pneumatic tools LUX-10.

Air-operated waste oil drainer waste car oil extractor PCAS-3197.

Keys for oil plugs 12 parts.