Broken thread replacement set M5 CONDOR MOR5380

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Bit set torx, hex, spline -54 pcs KB04760

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Klucz pneumatyczny udarowy 1/2 cala 1280 Nm

Single step double piston compressor oil tank with a capacity of 150 liters of capacity 320 l/min.

Impact Wrench 1/2 " 360Nm + socket set.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

DSG Clutch Removal Kit for VW Group C05/0213

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Specialized attachments are used to assemble and disassemble shock absorbers.

Tongs for wristbands.

Universal set for extruding the injectors with a hydraulic cylinder.

46pcs Socket Tool Set.

Professional puller for broken bolts and pins. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

Special kit for assembling and disassembling silent blocks in the front control arm VAG.

Universal kit for disassembly / squeezing bearings and bolt pins 

Mounting and dismounting kit for driveshaft with 295 mm bearings.

Device for replacing the crankshaft VW.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

Keys for oil plugs 12 parts.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

13 pieces of sheet metal spoons for car body, long and short in the set.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

A set of tools for valve sealants.

The key for the timing belt tensioner VW Audi.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Bit set torx, hex, spline-40 el.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Hard tools made of glass fiber reinforced plastic. 

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Wristband pliers set of 2 pcs.

Professional set of lambda probe caps 7 parts.

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

Handwheel - screwdriver.

Impact adapters.

Flat band clamp pliers used in cooling circuits.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Devices for assembly and disassembly of multi-groove belts.

Sandblasting gun for cabin sandblaster.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Set of socket wrenches for 14 element filters.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

Hand grease 120ml.

Thread repair set.

The set consists of 4 levers.

A set of sockets and keys for an alternator 24poz.

Universal extractor for extruding the injectors.

Device for assembling and disassembling the wrist joint in the steering system.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Clutch alingment tool set 17-piece KB04227.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

Lever set for upholstery clasps 27 pcs.

The key for adjusting the 27-42mm steering rods.

The device for screwing the brake pistons.

Set for dismantling the missing glow plugs KB02116.

Kit for regeneration, thread repair.

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

A set of filters for testing Common Rail injectors. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Piston ring tools 110-160 mm.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

108pcs Socket Tool Set YZ0804001

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

The BMW DIESEL belt pulley wrench.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Puller for disassembly of O-rings and simings.

Cable ties used in cooling circuits.

The torque wrench protractor for final tightening of bolts and nuts.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Set for 12 brake pistons, universal for most cars. 

3pc Fuel Line Disconnect Set.

A set of plastic buckles for prying the pins.

Make sure valves seat perfectly during a top-end rebuild.

Set of hooks and scrapers set of 5 pieces.

A set of cutters for regeneration of injector slots.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

Universal spring pullers are essential for professional chassis service. 

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Bit set torx, hex, spline -54 pcs KB04760

Pliers for brake springs, features:

• product weight: 1 kg.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Self-locking pliers for cutting exhaust pipes.

Hose clamp pliers for CLIC-R clamps.

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

DSG Clutch Removal Kit for VW Group C05/0213

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Pin drawing pliers.

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

Crimping and cutting pliers.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

Oil filter pliers 10".

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Retaining ring pliers.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Auxiliary sleeve for adjusting the camshaft position.

Walizka narzędziowa 171 elementów.

Set for springs and brake cups.

Sandblasting gun for cabin sandblaster.

A classic device for checking the tightness of cylinders with compressed air in a compact design.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

Sandblasting gun for siphon sanders. The gun matches the T06505, T06510, T06520A, T06520B gritter. Includes an additional 3 ceramic nozzles with covers.

Sworzeń 8x26 CCU-0059

PRZYRZĄD DO USTAWIANIA POMP WTRYSKOWYCH DIESEL.

Zestaw naprawczy 1/2 do grzechotki CCU-0058

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.