Fuel Tank Sender Spanner KBA3067

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

Handwheel - screwdriver.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

The BMW DIESEL belt pulley wrench.

The professional vacuum pump produces pressure and vacuum, designed for checking:

- fuel supply system,
- pressure sensors (operating range),
- exhaust gas recirculation valve,
- throttle,
- fuel pressure regulator,
- pressure modulator in automatic transmissions,
- brake assistance.

A set of sockets and keys for an alternator 24poz.

Professional puller for broken bolts and pins. 

The set is used for setting and installing bearings and hubs, for sleeve and shaft. 

A rich set of hammer hammers and thread adapters for dismantling Common Rail injectors. Everything in a practical case that makes it easier to keep order and prevent losing parts.

A set of plastic buckles for prying the pins.

Professional device that is used to pull ball joints from steering rods in large passenger cars, SUVs and delivery vans.

Crimping pliers for flexible hoses with 1/2 "to 3/4" jaws.

108pcs Socket Tool Set YZ0804001

Handwheel - screwdriver.

Tongs for wristbands.

Make sure valves seat perfectly during a top-end rebuild.

A set of cutters for regeneration of injector slots.

Walizka narzędziowa 171 elementów.

Universal spring pullers are essential for professional chassis service. 

The kit for testing the fuel pump carburettor and automatic gearboxes is used for synchronization of car and motorcycle carburettors, 2 and 4 throat. 

Devices for assembly and disassembly of multi-groove belts.

Bit set torx, hex, spline-40 el.

The key for the timing belt tensioner VW Audi.

Stand for mounting the engine 900 kg, workshop helper for working with the engine.

A stroboscope lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Device for replacing the crankshaft VW.

The key for adjusting the 27The key for adjusting the 27-42 mm steering rods.-42 mm steering rods.

Retaining ring pliers.

Zestaw do montażu i demontażu pasków klinowych jest bardzo pomocny podczas ściągania i zakładania pasków na koła pasowe.

High quality cross key for wheels with 1/2 ", 17, 19, 21mm ends, 250mm long.

The timing belt tension indicator can be used to adjust the timing belt movement in the range (1daN = 10N). 

Klucz nakrętki łożyska koła osi tył mercedes VARIO C01/0164

Universal extractor for extruding the injectors.

The device is designed for precise measurements of the curvature of the front suspension support pipes.

Clutch alingment tool set 17-piece KB04227.

A set of filters for testing Common Rail injectors. 

The set is used in the dismantling of valves in OHV and OHC engines without the need to disassemble the head.

The BMW DIESEL belt pulley wrench has a diameter of 57mm.

A professional set of keys for dismantling radio receivers in cars, indispensable in car services. 

This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain todrive chains or as a chain breaker by pushing the pin out.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Universal set for extruding the injectors with a hydraulic cylinder.

The set consists of 4 levers.

Pliers for brake springs, features:

• product weight: 1 kg.

Self-locking pliers for cutting exhaust pipes.

Mounting and dismounting kit for driveshaft with 295 mm bearings.

A workshop helper for working with the engine. It has four movable grippers fastened to a plate that rotates 360 degrees. 

Sandblasting gun for cabin sandblaster.

Crimping and cutting pliers.

The spanner has a torque range adjustable from 42 to 210 Nm. Equipped with a torque lock.

Cable ties used in cooling circuits.

Auxiliary sleeve for adjusting the camshaft position.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The set enables quick and easy assembly or disassembly of the control arm sleeve, without the need to pull the rear or front bars of the rocker arms.

A set of pliers for wristbands adapted for Ford, VAG, Mercedes and other systems on the Polish market.

Impact screwdriver with a shank and four tips in a practical plastic organizer.

Adapter, key for setting the variable camshaft unit VANOS BMW M62 and Range Rover Land Rover 4.4 8V.

Puller for disassembly of O-rings and simings.

Lever set for upholstery clasps 27 pcs.

The spanner has a torque range adjustable from 40 to 220 Nm. Equipped with torque lock.

Indispensable tool in every service and workshop, designed to tighten screws with pre-set torque.

Wristband pliers set of 2 pcs.

Oil filter pliers 10".

Set of socket wrenches for 14 element filters.

High-quality reinforced cross-wrench for wheels, has 4 tips: 17mm, 19mm, 21mm, 23mm. 

Stand for mounting a 900 kg engine, foldable, workshop helper for working with the engine.

Professional set of keys for (de) mounting of Bosch and Magneti Mareli alternators.

Specialized attachments are used to assemble and disassemble shock absorbers.

Application: dismantling of valves in OHV and OHC engines, without dismantling the head. 

The device for screwing the brake pistons.

Piston ring tools 110-160 mm.

10 pcs sensor socket set. Remove oxygen sensors, injectors, oil pressure sending units and vacuum switches.

Pliers for quick and easy assembly and disassembly of sealants on the motor head. 

Universal spring pullers are essential for professional chassis service. 

3pc Fuel Line Disconnect Set.

Set of hooks and scrapers set of 5 pieces.

The device for cutting and making ends of brake, hydraulic, copper, copper-nickel and thin-walled steel wires.

A specialist puller for dismantling Mercedes CDI injectors. The injector puller by screwing in Mercedes CDI engines with hardened bolt and thrust bearing.

Impact adapters.

Keys for oil plugs 12 parts.

Set for setting camshafts VW; AUDI 1.6, 2.0, 2.7, 3.0, 4.0 4.2 TDI Common Rail and Porsche 3.0 TDi.

Puller for joints, equipped with all required adapters. It is used to disassemble ball joints. The opening of the arm is 152 mm.

Hand grease 120ml.

The extruder is used to repair a round pipe profile or to expand the pipe diameter in order to connect two pipes with the same diameters. 

Professional hole-and-felcarka used for cutting holes and making a felce, or bends along the edge of the sheet allowing you to connect two elements together. 

Socket wrenches for Lambda probe set 2 pcs. Lambda (hot) end cap 1, 2 ", 22 mm x 50 mm, vacuum sensor and lambda probe (for low-seated probes) 3, 8", 22 mm x 30 mm.

Oil Pan Thread Repair Set M14x1,5 na M17x1,5 KB0025-3.

Pin drawing pliers.

13 pieces of sheet metal spoons for car body, long and short in the set.

Thread repair set.

A professional stand for mounting engines. The motor is mounted to the stand with 4 metal screws. 

Set for springs and brake cups.

Universal kit for disassembly / squeezing bearings and bolt pins 

Set of lever for ball joints 3 pcs. Universal has a screwed arm, adapter.

Device for assembling and disassembling the wrist joint in the steering system.

Set for 12 brake pistons, universal for most cars. 

A professional set for repairing various types of threads, including oil sumps, gearboxes, differentials. 

The subject of the auction is a set of pullers for ball pins, high quality steering rod ends made of forged steel. 

H10 Allen wrench with 7.5 mm hole for unscrewing the BOSCH injector valve.

Kit for regeneration, thread repair.

Set of 4 hooks with a handle. Hooks have hardened and chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135 mm.

The torque wrench protractor for final tightening of bolts and nuts.

Hard tools made of glass fiber reinforced plastic. 

Flat band clamp pliers used in cooling circuits.

Bit set torx, hex, spline -54 pcs KB04760

DSG Clutch Removal Kit for VW Group C05/0213

Hose clamp pliers for CLIC-R clamps.

The key for adjusting the 27-42mm steering rods.

Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that fit in the dimensions of the press.

The set is used to disassemble and assemble the front axle hub and bearings with the FORD Transit after 2000.

Sprężyna 112/26 z haczykami CCU-0055

Uszczelniacz wargowy 16/22/8 CCP-0295

Honing machine, features:

- 1/4 ",
- has 3 abrasive stones,
- for sleeve 45-88 mm,
- for embedding, e.g. in a drilling machine,
- a spring that pushes stones.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.

3pc Fuel Line Disconnect Set.

Set for springs and brake cups.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

Kit for regeneration, thread repair.

The tool is used to press in and out the pins without disassembly the control arm, thus saving you time and energy.

Clutch alingment tool set 17-piece KB04227.

Thread repair set for repairing various types of thread, including oil pan, gearbox, differential.

The thread set M5 is used to replace a broken thread e.g. in head, engine block housing etc.

The torque wrench protractor for final tightening of bolts and nuts.